Raising the standard

A harmonised European standard for water mist systems makes them a safe option for specific buildings and configurations.
Water mist, as the name suggests, is a fire suppression technology that uses a very fine water spray rather than the heavier flow of conventional sprinklers to bring a fire under control. The fine droplets convert rapidly to steam on contact with heat, drawing energy from the fire and displacing the oxygen around it, as opposed to simply dousing the space in water. This gives it certain qualities that appeal to facilities teams: a lighter touch on the building fabric, smaller plant requirements, and more flexibility for sites where a conventional installation would be a tight fit.
Sprinklers, fire detection and gas suppression have relied on prescriptive, internationally recognised standards for decades, reinforced by long-established third-party certification of the companies designing and installing systems. The same isn’t true for water mist, despite the technology existing for nearly 30 years.
NEW STANDARDS
Published last year, EN 14972, a harmonised European standard for water mist systems, means that is no longer the case. EN 14972 runs to 17 parts: one covering design, and 16 setting out full-scale fire test protocols across ordinary and high-hazard applications. Suitability for a given application must now be demonstrated through full-scale fire testing against the relevant protocol. Just as importantly, the underlying design parameters, such as water supply duration and hazard classification, have been deliberately aligned with established sprinkler parameters, making meaningful, like-for-like comparison possible for the first time. Earlier standards, including the previous British standard and the American NFPA 750, required suitability to be proven in principle, but lacked the protocols needed to enforce that requirement consistently.
Building owners are already feeling this shift at insurance renewal. Insurers once instinctively wary of water mist, have responded differently now that they can validate testing and certification instead of a manufacturer’s claims.
The first question isn’t whether the system is “sprinkler equivalent”, but whether full-scale fire test evidence exists for the specific application and hazard category involved. The second is what any third-party certification covers, such as the fire performance of the system itself or just the supplier’s quality management processes. The third is whether manufacturer guidance has been produced for that particular risk category, since water mist systems, unlike sprinkler components, aren’t interchangeable between manufacturers, and design guidance from one cannot simply be transferred to another.
WATER MIST APPLICATIONS
Properly specified, water mist suits situations where conventional sprinklers struggle, typically because of the water volume sprinklers need, the space that volume demands, or where water damage poses a significant risk. Heritage buildings are one example, where water damage to historic fabric is a serious concern. Car parks, where space for large tanks is limited and unpredictable lithium-ion battery fires from EVs are increasing, is another. While no fire suppression system can stop the self-sustaining nature of these battery fires, water mist’s cooling spray helps contain it. It’s three-dimensional mechanism, closer to gas suppression than sprinklers, often does the job with a smaller footprint and less disruption than a sprinkler retrofit
The question for facilities teams is whether it’s been proven to work for a particular building, risk and configuration. EN 14972 is what now makes that question answerable with confidence, leaving behind the residual scepticism from a less
regulated era.
The post Raising the standard appeared first on FMJ.



